Ariston Washing Machine Error Codes

Ariston Washing Machine Error Codes

Ariston Washing Machine Error Codes

Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Ariston washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.

Error CodesSolution
F1Triac Short. Replace Control Board.
F2Main Motor. Check Main Motor connections. Replace Main Motor. Or, replace Control Board.
F3NTC (Water Temp) Open / Short. Check wiring continuity to Control Board. Replace NTC. Or, replace Control Board.
F4Pressure Switch. Check wiring continuity to Control Board. Replace Pressure Switch. Or, replace Control Board.
F5Blocked Drain Motor or Pressure Switch shorted in Empty position. Check Drain Hose. Check Drain Motor clean out for obstruction. Check voltage at Drain Motor. Check Pressure Switch wiring continuity. Replace Drain Motor / Pressure Switch. Or, replace Control Board.
F6Program Selector. Check wiring continuity to Control Board. Replace Program Selector. Or, replace Control Board.
F7Heater relay stuck.
F8Pressure Switch Shorted in Full Position. Check Pressure Switch wiring continuity. Or, replace Pressure Switch. Or, replace Control Board.
F9Control Board Error. Incorrect version of Control Board or EEPROM. Change Control Board and EEPROM.
F10Pressure Switch Shorted. Check wiring continuity to Control Board. Replace Pressure Switch. Or, replace Control Board.
F11Drain Motor. Check wiring continuity to Control Board. Check Drain Motor clean out for obstruction. Voltage check at Drain Motor. Check Pressure Switch. Replace Drain Motor. Or, replace Control Board.
F12No Communication Between Display and Control Board. Check Wiring Continuity. Voltage Check from Control Board to Display.
F13NTC (Dryer Temp) Open / Short
F14Dryer Heating Element is Open. Check Dryer Heating Element continuity. Check wiring from Element to Control Board. Replace Heating Element. Or, replace Control Board.
F15Dryer Heating Element Relay Shorted. Check Dryer Heating Element continuity. Check wiring from Element to Control Board. Replace Control Unit.
F16Extremely high water level Disconnect or turn off the water supply and ensure that the water level does not rise any more.
F17Door Open, or Door Lock Faulty. Check if Door is Closed.
F183 Phase Motor Control Faulty. Check Control Board. Change Control Board and EEPROM.
H20Not filling. Check tap, hose and inlet valves.
LOCKEDCheck interlock.
F20/1The thermistor resistance has drifted or the temperature scanning sequence is incorrect.
F30/31A motor drive problem has occurred.
F40Water below protection level during a heat step.
F41Water level detect sequence incorrect.
F50/51Customer language and wash programme have not been saved. The system will run with default conditions (1000rpm max and English language). to re-programme your product.

Ariston Washing Machine Troubleshooting

ProblemPossible causes
The machine does not switch on.The appliance is not plugged into the socket fully, or not enough to make contact.
There is no power to the socket, or the fuse has blown in the mains plug.
The door is not closed properly.
The ‘ON/OFF’ button has not been pressed.
The ‘START/PAUSE’ button has not been pressed.
The water tap has not been turned on to allow water to flow into the machine.
A delayed start has been set.
The machine does not fill with water or the indicator light for the first wash cycle stage flashes rapidly.The water inlet hose is kinked.
The water inlet hose is not connected to the water supply.
The water pressure is too low.
The water tap has not been turned on to allow water to flow into the machine.
There is no water supply to the house.
The inlet valve filter is blocked.
The ‘START/PAUSE’ button has not been pressed.
The machine continuously fills with water and continually drains away or Water left in the dru or Stuck on wash.The top of the drain hose is too low – It must be fitted at a height between 65 and 100 cm from the floor.
The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.
The end of the drain hose has been pushed too far down the standpipe, the ‘U’ bracket should be fitted 100 mm from the end of the drain hose.
The machine does not drain or spin.The Pump filter is blocked.
The drain hose is kinked.
New Installation – The blanking cap or spigot has not been removed if connected under a sink.
The drain hose or sink trap is blocked.
The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.
The REDUCED CREASES function button has been activated. To complete the wash cycle, press the START/PAUSE button.
The ‘Spin Speed’ selector knob is in the @ position.
The programme takes too long.Programme times will vary due to water pressure, the incoming water temperature and if the wash load goes out of balance. This will increase the programme times accordingly.
The machine vibrates a lot during the spin cycle.The feet have not been adjusted, enabling the machine to rock.
New Installation – Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine.
The machine is trapped between cabinets and/or walls.
The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

Ariston Washing Machine Manual PDF

Whirlpool Refrigerator ARB-884SGYS Electric Diagram

HVAC Solution

Leave a Reply

Your email address will not be published.