LG Washing Machine Error Codes
Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of LG washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
| Error Codes | Solution |
|---|---|
| IE | Water supply is not adequate in area. Check another tap in the house. |
| OE | Drain hose is kinked or clogged. Clean and straighten the drain hose. |
| UE | Load is too small. Front Load Washer Out of Balance. |
| dE | Ensure door is not open. Close the door completely. If ‘dE ,dE 1 ,dE 2 ’ is not released, call for service. |
| dE 1 | Ensure door is not open. Close the door completely. If ‘dE ,dE 1 ,dE 2 ’ is not released, call for service. |
| dE 2 | Ensure door is not open. Close the door completely. If ‘dE ,dE 1 ,dE 2 ’ is not released, call for service. |
| tE | Unplug the power plug and call for service |
| FE | Water overfills due to the faulty water valve. Close the water tap. Unplug the power plug. |
| PE | Water level sensor has malfunctioned. Close the water tap. Unplug the power plug. |
| LE | Over load in motor. Allow the washing machine to stand for 30 minutes to allow the motor to cool, then restart the cycle. |
| AE | Water leaks. |
| DE | The lid is not closed properly. Make sure that the lis is closed properly and press the START/PAUSE button. After starting a cycle, it may take a few moments before the tub begins to turn or spin. |
| dL | The lid is not closed properly. Make sure that the lid is closed properly and press the START/STOP button. |
| dr | Special Drain Feature. If the washer is paused during a cyclefor more than five minutes, the cycle will be cancelled and any water remaining in the tub will be drained. |
| ub | The washer has detected an out of balance load. If the washer detects a load that is too far out of balance to spin, it will display this code while it is attempting to rebalance the load. |
| E6 | Clutch error. Mechanical failure. Unplug the washer and call for service. |
| dHE | Control Error. Unplug power plug and call for service. |
| PF | The washer experienced a power failure. |
| CE | Over load in motor |
| DE | Draining Error |
| tE, TE1, TE2, TE3, TE4 | Heating Error. There is an issue with thermistor. |
| EHE – ELE | Heater Error. This indicates an issue with the heating element. |
Troubleshooting Guide
| Symptom | Possible Cause and Solution |
|---|---|
| Rattling and clanking noise | Foreign objects such as coins or safety pins maybe in drum or pump. Stop washer, check drum and drain filter. If noise continues after washer is restarted, call your authorised service centre. |
| Thumping sound | Heavy wash loads may produce a thumping sound. This is usually normal. If sound continues, washer is probably out of balance. Stop and redistribute wash load. |
| Vibrating noise | • Have all the transit bolts and packing been removed? If not removed during installation, refer to Installation guide for removing transit bolts. |
| Water leaks | -Fill hoses or drain hose are loose at tap or washer. Check and tighten hose connections. House drain pipes are clogged. -Unclog drain pipe. Contact plumber if necessary. |
| Oversudsing | Too much detergent or unsuitable detergent may cause excessive foaming which may result in water leaks. |
| Water does not enter washer or it enters slowly | Water supply is not adequate in area. Check another tap in the house. |
| Water in the washer does not drain or drains slowly. | Drain hose is kinked or clogged. Clean and straighten the drain hose. |
| Washer does not start | Electrical power cord may not be plugged in or connection may be loose. Make sure plug fits tightly in wall outlet. |
| Washer will not spin | Water supply tap is not turned on. Turn on water supply tap. |
| Door does not open | Once machine has started, the door cannot be opened for safety reasons. Check if the “Door Lock” icon is illuminated. You can safely open the door after the “Door Lock” icon turns off. |
| Wash cycle time delayed | The washing time may vary by the amount of laundry, water pressure, water temperature and other usage conditions. If an imbalance is detected or if the suds removing programme is on, the wash time shall be increased. |
| Fabric softener overflow | Too much softener may cause an overflow. Follow softener guidelines to ensure appropriate amount is used. Do not exceed the maximum fill line. |
| Softeners dispensed too early | Close the dispenser drawer slowly. Do not open the drawer |
