Logik Refrigerator Error Codes
Refrigerator is useful Product for Every home And this product used in every home. Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Logik Refrigerator and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
| Error Codes | Solution |
|---|---|
| E1 | Checking the connection of main board have problem or not. |
| E2 | Take off the evaporator temperature sensor ,and Measure the resistor , if sensor is bad ,change a new one. |
| E3 | Take off the evaporator temperature sensor ,and Measure the resistor , if sensor is bad ,change a new one. |
| Refrigerator can’t start | Is the power cord connecting well? |
| Is the power voltage too low? | |
| Is the sensor irrational setting? | |
| Is the ambient temperature too low? | |
| Is the circuit on power? | |
| Is there some default in compressor | |
| Is the refrigeration system blocked by ice or dirty, please stop the unit and restart after 10 minutes to see if the compressor can start | |
| Weak cooling effects | Is there any heat source around the refrigerator? |
| Is there enough space around the refrigerator for rejection of heat? | |
| Is the setting of the temperature appropriate? | |
| Is there too much food or overheating food in it? | |
| Does there open the door frequently? | |
| Is the door completely closed? | |
| Does the gasket destroyed or distort? | |
| Does the gas leak? | |
| The unit can not stop running | Is there any heat source around the refrigerator? |
| Is there enough space around the refrigerator for rejection of heat? | |
| Is the setting of the temperature appropriate? | |
| Is there too much food or overheating food in it? | |
| Does there open the door frequently? | |
| Is the door completely closed? | |
| Does the gasket destroyed or distort? | |
| Is the thermostat good operation? | |
| Does the gas leak? | |
| The setting temperature is not reasonable. | Readjust the temperature setting |
| the sensor is bad | Replace the sensor |
| Seal of door is damaged | Replace the gasket |
| Too much food in the refrigerator | Please put the food properly |
| Wind door is broken | Replace wind door |
| Fan motor is broken | Replace fan motor |
| Leakage of Gas | First find out the point of leaking on tube, and then sealed it, vacuuming it, finally recharge with Gas. |
| The quantity of Gas is too much | First stop unit for several minutes, and then open charging tube, discharge all of gas. Change a new filter, and then recharge gas, finally sealed the system. |
| There is air in the liquid cycle system | First stop unit for several minutes, and then open charging tube, discharge all of gas. Change a new filter, and then recharge gas, finally sealed the system. |
| Low working efficiency of compressor | Change a new compressor. |
| There is something that blocked the liquid cycle system | Change a new filter |
If you use a refrigerator, you must protect and care for your refrigerator so that your refrigerator performs well in cooling.
The refrigerator should be placed in a place where there is ventilation (ventilation mean = Air Crossing).
If you want to read more about Logik refrigerators, download the PDF file from the link below. You will find a lot Information in this PDF file.
