| dL | The door was unlocked while the washer was running |
| dS | The door was opened while the washer was running |
| d5 | The door was opened while the washer was running |
| FL | The washer failed to lock the door |
| Hr | Washer temperature control problem Heater Relay Failure (on main PCB) |
| LO | The door will not unlock |
| 5E or SE | Washing machine has failed to drain the water |
| 4E | Water fill time out |
| ND | Water Does Not Drain From Washer |
| NF | Water fill time out = No Fill |
| dE | Washing machine door detected as being open |
| UE | Washing machine has detected an imbalanced load |
| DC | Washing machine has imbalanced load and will not spin |
| 3E | Motor Drive Error or Hall Sensor Error |
| bE | Motor short error |
| OE | Washing machine has detected an overfill situation |
| LE | Water leak – Excessive SUDS – Bad water level switch |
| HE | Water heating error detected |
| tE | Water heating sensor (thermistor) error detected |
| IE | Water level sensor fault |
| CE | Abnormal water temperature detected |
| E1 | Not filling in allocated time |
| E2 | Pump won’t empty – not draining |
| E3 | Overflow – overfilling with water |
| E4 | Out Of Balance (OOB) detected |
| E5 | Water temp rising or falling too quickly |
| E6 | Water temp rising or falling too quickly |
| E7 | Pressure switch |
| E8 | Temp too high on low temp washes |
| E9 | Water leak, Water level has reduced |
| EA | Motor generator error |
| EB | Motor error |
| EC | Thermistor |
| ED | Door Open |
