Samsung All Washing Machine Error Codes
Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Samsung washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
Error Code : 1E or E7 or 1C
Cause : Water level sensor Issue
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : 3E,3E1,3E2,3E3,3E4,EA,EB OR 3C
Cause : Motor defect
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : E4 OR E1 OR 4C
Cause : Water supply error. The appliance is not detecting that the unit is filling with water.
Solution :
• Check water supply is turned on and that there is adequate water pressure (min:0.5bar, max: 8bar).
• Check to see if the water hoses are not kinked. Check Inlet filters inside end of Water Valve.
• If problem persists please call the customer support team.
Error Code : 4E1,4E2 OR 4Ed
Cause : Water temperature issue
Solution :
• Check water hose is connected to a cold supply and not a hot supply. Cold water is usually indicated by a blue tap.
• If problem persists please call the customer support team.
Error Code : 5E, 5C OR E2
Cause : Water drainage issue. Water is not draining from appliance.
Solution :
• Check drainage pump filter for blockages (e.g. lint, coins hair, clips)
• Check drain hose and waste connection for kinks and blockages.
Then select a spin cycle to drain the remaining water in the appliance.
• If problem persists please call the customer support team.
Error Code : 6E
Cause : Water heater not functioning
Solution :
• If problem persists please call the customer support team.
Error Code : 6F
Cause : Unknown: this is not an error code. Contact us about this.
Solution :
• If problem persists please call the customer support team.
Error Code : 8E
Cause : Over current error
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : 9E1 OR PH1
Cause : Power error
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : 9E2 OR Plo
Cause : Power error
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : AE OR 13E
Cause : Signal communication error between Main PCB and Sub PCB
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
• If problem persists please call the customer support team.
Error Code : bE
Cause :Motor issue
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
• If problem persists please call the customer support team.
Error Code : bE1 OR 12E
Cause : Power button issue
Solution :
• Button held in too long. Check whether any of the buttons are sticking or are stuck in. Disconnect appliance from mains and clean the buttons with a lightly dampened cloth.
• If problem persists please call the customer support team.
Error Code : B2/bE2 OR 14E
Cause : Control button issue
Solution :
• Button held in too long. Check whether any of the buttons are sticking or are stuck in. Disconnect appliance from mains and clean the buttons with a lightly dampened cloth.
• If problem persists please call the customer support team.
Error Code : bE3 OR 18E
Cause : Button defective
Solution :
• If problem persists please call the customer support team.
Error Code : CE OR E8
Cause : Water cool down issue
Solution :
• Check water hose is connected to a cold supply and not a hot supply. Cold water is usually indicated by a blue tap.
• If problem persists please call the customer support team.
Error Code : dE,dE1 OR Ed
Cause : Door issue
Solution :
• Check that the door is closed fully.
• Check nothing is trapping in the door.
• Check unit is not overloaded.
• If problem persists please call the customer support team.
Error Code : dE2
Cause : On/Off switch error
Solution :
• Button is being operated continuously. Please disconnect appliance from mains wait 5 minutes and then try again.
• If problem persists please call the customer support team.
Error Code : FE
Cause : Fan error
Solution :
• If problem persists please call the customer support team.
Error Code : H1 OR HE
Cause : Water temperature issue
Solution :
• If problem persists please call the customer support team.
Error Code : HE1 OR E5
Cause : Water heater not functioning
Solution :
• If problem persists please call the customer support team.
Error Code : HE2
Cause : Dryer heater not functioning
Solution :
• If problem persists please call the customer support team.
Error Code : HE3
Cause : Steam function does not operate normally
Solution :
• If problem persists please call the customer support team.
Error Code : HOT
Cause : Appliance too hot
Solution :
• This is not a fault; appliance fan will continue to run until the appliance is cool enough for the washing to be removed (55°C). Then the door will unlock. – This prevents heater faults.
Error Code : LE, LE1, E9 OR 11E
Cause : Natural drain/Water leak – Low water level detected during cycle.
Solution :
• Check that the level of the drain hose is not lower than the base of the washing machine. Additionally check for a water leak. If no trace of water, switch off the power, reconnect and try again.
• If problem persists please call the customer support team.
Error Code : OE, OF OR E3
Cause : Overflow error
Solution :
• Too much washing powder/liquid may have been added. Switch off the power to the appliance, wait 30 seconds then Switch the power supply back on. The drain pump should operate to drain the washing machine.
• If problem persists please call the customer support team.
Error Code : t1, ee2/t2 OR tSt
Cause : Appliance in test mode
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : SUD (sometimes misread as 5UD)
Cause : This occurs when too much foam is detected and is displayed whilst foaming is being removed.
Solution :
• This is not a fault.
• The appliance will usually cure this fault on its own, however if it does not you will need to run either an “Eco drum clean” cycle (some models) or a 90°C cotton cycle with no detergent or washing load.
• To prevent this from happening please reduce the quantity of detergent used.
Error Code : tE OR EC
Cause : Temperature sensor issue
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : tE1, tE2 OR tE3
Cause : Temperature sensor error
Solution :
• If problem persists please call the customer support team.
Error Code : UC
Cause : Excessive fluctuation in the supply voltage
Solution :
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.
• If problem persists please call the customer support team.
Error Code : UE OR E4
Cause : Unbalanced error – The load in the drum is unbalanced.
Solution :
• This is not a fault. The appliance is detecting an unbalanced load and is stopping the spin for safety reasons.
• To help prevent this from occurring please redistribute washing by adding or removing items to ensure a more balance load.
• Single large/heavy items such as bath mats or large towels are unlikely to spin on their own so please add 2/3 additional towels and put on another spin cycle.
