Sanyo Washing Machine Error Codes
Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Sanyo washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
|U4||The washer does not spin. Close the Washer Lid.|
|U3||The washer does not spin.Check whether the laundry is clumped on one side of the Wash/ Spin Tub or not.|
Check whether the Washer is on the level surface or not.
|U5||Does not wash. Check whether the Child safety mode is set or not. Close the Washer Lid.|
|E1||Water does not flow into tub or water flow is slim. .Turn the water supply faucet on.|
Check whether the water supply has been cut off or not.
Check whether the metal filter of the Water Inlet is clogged or not.
Check whether the washer has been freezing or not.
|E2||Water does not drain out.Put down the Drain Hose from the hookhole.|
Check whether there is anything wrong with the Drain Hose or not.
Check the Drain Hose for any obstructions.
Check whether the Drain Hose is clogged with lint or not.
Check whether the Drain Hose rises too high (more than 15 cm) off the ground or not.
Check whether the Drain Hose is too long (longer than 3m) or not.
Check whether the diameter of the Drain Hose is too small or not.
|EA||Press the START/ PAUSE button or turn the POWER SWITCH.|
|EC||Press the START/ PAUSE button or turn the POWER SWITCH.|
|EH1||Power supply problems; PCB faulty. Wait for frequency nominal conditions.|
|EH2||Power supply problems; PCB faulty. Wait for voltage nominal conditions.|
|EH3||Power supply problems; PCB faulty. Wait for voltage nominal conditions.|
NOTE: The Trouble indicators can be released by pressing the START/PAUSE button once if you want to release the emergency stop. Then press the START/PAUSE button again to restart the operation.