Miele Refrigerator Error Codes
Refrigerator is useful Product for Every home And this product used in every home. Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Miele Refrigerator and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
| Error Codes | Problem |
|---|---|
| F0 | Fault-in sensor fresh air ”BioFresh” |
| F1 | The sensor of the refrigerating chamber |
| F2 | Faulty evaporator sensor |
| F3 | Faulty air sensor freezer comparment |
| F4 | Indicates a failure in the sensor evaporator |
| F5 | Card malfunction microprocessor control |
| 01,_F,21 | Ice fault |
| Normal noises: Brrrrr … | A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. |
| Normal noises: Blubb, blubb … | A gurgling noise can be heard when coolant is circulating through the pipes. |
| Normal noises: Click … | Clicking sounds are made when the thermostat switches the motor on and off. |
| Normal noises: Sssrrrrr … | On multi-zone and frost-free appliances you can sometimes just hear the movement of the fan inside the appliance. On appliances with a water tank a buzzing sound can be heard when water is being pumped out of the water tank. |
| Normal noises: Crack … | A cracking sound can be heard when materials expand inside the appliance. |
| nA | The temperature in the freezer section has risen too high at some point during the last few days because of a power failure. Press the alarm off button while “nA” is lit in the display. The display will show the warmest temperature reached in the freezer during the power failure for about 1 minute. The display will then revert to the current temperature in the freezer section. After the power failure the appliance will continue running at the last temperature set, there is no need to re-set. |
Miele Refrigerator Troubleshooting
With the aid of the following guide, minor problems can be easily corrected without contacting Miele. If, after consulting this guide, you cannot remedy the problem, please contact Miele. Please note, however, that a call-out fee will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions. To prevent cold from escaping, avoid opening the appliance door until the fault has been corrected.
| Problem | Possible cause | Remedy |
|---|---|---|
| You cannot switch the appliance off. | The safety lock is switched on. The ”lock” symbol lights up. | Switch the safety lock off (see “Settings – Switching the safety lock on/off”). |
| The external walls of the appliance feel warm. | This is not a fault. The heat which results from the cooling process is used to avoid the build-up of condensation on the appliance. | None. |
| The floor of the refrigerator is wet. | The condensate drain hole is blocked. | Clean the condensate channel and drain hole. |
| The LED lighting on the fruit and vegetable drawer does not work. | To avoid overheating, the lighting switches itself off automatically after approx. 15 minutes if the door is left open. | To avoid overheating, the lighting switches itself off automatically after approx. 15 minutes if the door is left open. |
| The LED lighting on the adjustable shelves does not work. | To avoid overheating, the lighting switches itself off automatically after approx. 15 minutes if the door is left open. | Close the appliance door. When the door is reopened, the interior lighting will work again. |
| The LED lighting on the adjustable shelves does not work. | Liquid has come into contact with the LED lighting on a shelf or the metal discs (contacts) in the left-hand support ribs. A safety cut-out switches the interior lighting off. | Wipe the stainless steel strip with LED lighting with a damp cloth and dry it with a soft cloth, or let it dry outside the appliance. Clean the metal discs (contacts) in the same way. |
| The LED lighting on one of the adjustable shelves does not work. | The adjustable shelf is not sitting correctly in the support ribs. | Push in the shelf until it clicks into position. |
| “F0 to F9” appears in the display. | There is a fault. | Call Miele. |
| The temperature in the appliance is too high. | This is not a fault. | Correct the temperature setting. Check the temperature again after 24 hours. |
| The compressor is switching on more frequently and for longer periods. | The ventilation gaps in the housing unit have been covered or become too dusty. | Do not block the ventilation gaps. Clean the ventilation gaps on a regular basis. |
| The compressor runs continuously. | To save energy, the compressor runs at a lower speed, but for longer, when less cooling is required. | None. |
| The temperature in the appliance is too low. | The temperature setting is too low. | Correct the temperature setting. |
| The appliance does not get cold, although the controls and the interior lighting are working. | The Demo mode is switched on and the symbol lights up in the display. This allows the appliance to be presented in Miele Centers and retail stores without switching on refrigeration. Do not switch on Demo mode at home | Switch off Demo mode (see “Information for Miele Centers and Chartered Agents – Demo mode”). |
| The appliance does not get cold, the interior lightning does not come on when the door is opened, and the display is dark. | The appliance is not switched on and the mains connection symbol lights up in the display. | Touch the On/Off sensor. |
If you use a refrigerator, you must protect and care for your refrigerator so that your refrigerator performs well in cooling.
The refrigerator should be placed in a place where there is ventilation (ventilation mean = Air Crossing).
If you want to read more about Miele refrigerators, download the PDF file from the link below. You will find a lot Information in this PDF file.
