Candy Washer Dryer Error Codes
Candy Washer Dryer Error Codes
Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Candy Washer Dryer and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
| Error Codes | Meaning |
|---|---|
| ERROR 0 | Defective “Cuore” Control Module-Not Programmed “Cuore” Control Module. |
| ERROR 1 | Door Safety Lock Device/Drum’s Braking device defective and/or Wiring. |
| ERROR 2 | The Water Fill Phase was not completed within the designed limit time. Defective Solenoid Valve, Pressostat, Water Fill Hose, Low Water Pressure in the network and/or Wiring. |
| ERROR 3 | The Water Drain Phase was not completed within the designed limit time. Clogged Filter, Drain Pump, Drain Hose, Wall Discharge and/or Wiring. |
| ERROR 4 | Several (3) interventions by the Anti-flood Safety Contact of Pressostat. Solenoid Valve blocked opened, defective Pressostat and/or Wiring. |
| ERROR 5 | NTC Temperature Reading Probe opened or shorted and/or Wiring. |
| ERROR 6 | Eeprom-Defective “Cuore” Control Module and/or Wiring. |
| ERROR 7a | (MDL) Jammed Motor’s Rotor and/or Wiring. |
| ERROR 7 | Defective Door Safety Lock Device (blocked closed) and/or Wiring. |
| ERROR 8 | Defective Tachometric Dynamo (opened or shorted) and/or Wiring. |
| ERROR 9 | Defective “Cuore” Control Module (damaged Motor’s TRIAC) and/or Wiring. |
| ERROR 12 | Missing dialogue between “Cuore” Control Module and Display board and/or Wiring. |
| ERROR 13 | Missing dialogue between “Cuore” Control Module and Display board and/or Wiring. (MDL) – Defective “Cuore” Control Module and/or Wiring. |
| ERROR 14 | Missing Water Heating: defective NTC Probe and/or defective Water Heating Element and/or Wiring. |
| ERROR 15 | Defective “Cuore” Control Module-Not Programmed “Cuore” Control Module. |
| ERROR 16 | Water Heating Element is short circuited or defective electrical insulation. |
| ERROR 17 | Wrong signal from Tachometric Dynamo. |
| ERROR 18 | Defective “Cuore” Control Module and/or Wiring-Wrong Network Frequency. |
