0

Sharp Washing Machine Error Codes

Sharp Washing Machine Error Codes

Sharp Washing Machine Error Codes

Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Sharp washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.

ES-U10HT Model-Sharp Washing Machine Error Codes

ES-U10HT Model-Sharp Washing Machine Error Codes
Error CodeProblem OR Solution
E1Low flow at the faucet. Inclease water supply, press START / PAUSE key.
The faucet is closed. Turn the faucet on, press START/PAUSE key.
Water inlet filter net is blocked. Clean filter net, press START/PAUSE key
E2Top cover is opened as the reservation course starts. Close top cover.
Top cover is not closed during spin drying. Close top cover.
E3The drain position is relatively high. Adjust drain hose properly, press START/PAUSE key
The end of drain hose is blocked. Clean drain hose, press START/PAUSE key.
Drain hose is folded/ crumpled/tied. Clean drain hose, press START/PAUSE key.
E4Washing machine inclines or is shaky. Washing machine place the horizontally with adjusting the foots
The clothing is lopsided. Distribute the clothing evenly
E5Draining position is relatively high. Lower down the drain hose, press START/PAUSE button.
Drainage hose is frozen or blocked. Defreeze/unblock drainage hose, press START/PAUSE button.
Drainage hose is bent, squeezed, tangled. Smooth out drainage hose, press START/PAUSE button.
E7Lid do not close when safety lock is on. Close the lid in 10s and program will resume itself; if lid is still open after 10s, machine will start draining. To resume, deselect SAFETY LOCK mode.
C2Water level sensor shows an abnormal level. Water level sensor shows an abnormal level.
U9Top cover opened in the situation of CHILD LOCK. Turn the power off, and take it from the top. CHILD LOCK is not released, unless you reset it manually

Model ES-GFC Sharp Washing Machine Error Codes

Model ES-GFC Sharp Washing Machine Error Codes
Error CodePossible FailureSolution
E01The door is not shut properlyShut the door properly so that you hear the click
E02The water level in your machine may be low, or the water pressure may be lowCheck that the cold water tap is fully turned on
E03The pump has failed, or the pump filter is obstructedCheck that the cold water tap is fully turned on
E04There is an excessive amount of water in your Washing MachineYour Washing Machine will automatically drain the water. Turn your Washing Machine off, unplug it and contact the Sharp helpdesk
There is no water supply or the mains water pressure is lowCheck mains water supply is on and has sufficient pressure. If the mains supply has been cut off, switch the control dial to Stop and re-select the programme once the supply has been restored.
Faulty pump or clogged pump filterThe pump filter may be clogged. Check and clean if necessary

Model ES-D Sharp Washing Machine Error Codes

Model ES-D Sharp Washing Machine Error Codes
PROBLEMCHECK POINT
• Did you connect the inlet hose and open the water tap?
• Is the inlet hose or the water tap frozen?
• Is the water supply shut off?
• Does foreign matter block up the inlet hose filter?
• Is the drain hose frozen or blocked up by dirt?
• Is the drain hose kinked or deformed?
• Is the end of the drain hose immersed in water?
• Is there excessive dirt inside the pump housing?
• Is the clothes in the tub collected on one side?
• Is the washing machine installed on an uneven floor or is the
vibration serious?
• Is the lid open?
(The lamp LE will light up in this case.)
The washer will not operate at all.• Is there a power failure?
• Is the power cord correctly connected to an electric outlet?
• Is the electric fuse broken?
• Did you turn on the power?
• Did you press Start/Pause button?
• Is there correct amount of water in the tub?

Sharp Washing Machine Manual PDF

Whirlpool Refrigerator ARB-884SGYS Electric Diagram

HVAC Solution