Midea Washing Machine Error Codes
Washing Machine is useful Product from Every home And it is a product used in every home Sometimes it contains an error code. We can fix some error codes at home and we need to call a technician to fix some error codes. In this post you will find all the error codes of Midea washing machine and I hope you will benefit a lot from this post. If you find it helpful, please share this post.
| Error Codes | Solution |
|---|---|
| F0 | Alarm for the power cut off failed. 1. Cut off power and start it 5 minutes later. 2. Report for repairing |
| F2 | Alarm for reading EEPROM failed. Report for repairing. |
| F8 | Alarm for water level sensor. Report for repairing. |
| E1 | Alarm for abnormal water intaking. 1. Open the water tap. 2. Hydraulic pressure is low, increase inlet water amount. |
| E2 | Alarm for water drain has not finished. Check if water drain hose is placed correctly. Clean the stem. |
| E3 | Alarm for lid not closed before spin. Please close the door lid. |
| E4 | Alarm for washing stay at one side. Placed the washing equably. |
| E5 | The water fills too much to exceed its preset level. |
| E6 | Not normally open or unlocked door. The door can be open only by pull up the power when the door is locked, and it can power-off and alarm-cleared by press the power key when the door lock is open. |
| E10 | Inlet water overtime. Open the water tap,to check if the inlet hose is squashed or kinked,check the filter in the inlet valve is blocked or not;check if the water pressure is too low. |
| E12 | Overflow protection. The water level exceed overfloow level. The machine lock the door, close inlet valve, motor stop working, drain water in error status. 1. Restart machine. 2. Change inlet valve. |
| E21 | Overtime of the drainage. Check if the drain pump is blocked. |
| E30 | The door has not been closed. Check if the door of the Washing machine is closed check if the clothes is pinned by the door. |
| E50 | Others. Please call up the service line if there is any other problem. |
| E60 | Error E60, E61, E62 etc. generally refers to a heating problem with the machine |
| HU | High voltage protection ≥ 270±10V. The power cut off automatically. |
Midea Washing Machine Troubleshooting
| Troubles | Reason | Solution |
|---|---|---|
| Door will not open | This is the machine’s safety protection. | Disconnect the power, wait a few minutes, door will then open. |
| Heating fault | Heating element damaged. | Can only wash without heat. Contact the service centre promptly. |
| Water leakage | The connection between inlet pipe or outlet hose and tap or washing machine is not tight. Drain pipe is blocked. | Check and fasten water pipes. Clean up outlet hose. Arrange a service person to repair if necessary. |
| Water overflowing from bottom of machine | The inlet hose is not connected firmly. Drain hose has a leakage. | Fix the inlet hose in place securely. Replace the drain hose. |
| Indicator or display does not light | Power is disconnected. PC board has problems. Harness has connection problem. | Check if the power is shut down and power plug is connected correctly. If not, please contact customer care. |
| Detergent residue in the dispenser drawer | Washing powder is dampened and agglomerated. | Clean and wipe the drawer. Use liquid detergents or detergents especially for front load washers. |
| Poor washing effects | The clothes are heavily soiled. Insufficient detergent quantity. | Select appropriate wash program. Add the proper detergent quantity according to instructions on the detergent package. |
| Washing machine will not start up | Check if the door is closed tightly. Check if power plug is inserted correctly. Check if water supply tap is opened. Check if button “Start/Pause” is pressed. Check if button “Power” is pressed. | |
| Abnormal noises and vibrations | Check if the transit bolts have been removed. Check if installed on solid and level floor. Check if the feet of the washing machine are leveled correctly. Check for hair clips or metal articles inside the drum. |
